Forever E-Bike china Try not to use zero start (that is, start in situ), especially when it is loaded and uphill. When starting, you should first use human power to ride, and then switch to electric driving when reaching a certain speed, or directly use electric assist to drive. This is because when starting, the motor must first overcome the static friction force. At this time, the current is relatively large, approaching or even reaching the blocking current, which makes the battery work with a large current and accelerates the damage of the battery.

When riding an electric bicycle, use human-assisted or electric-assisted methods as much as possible, especially when going uphill, carrying a load, driving against the wind or on rough roads, you must use human assistance to ride. In this way, the battery can be prevented from being discharged by a large current for a long time, which may damage the battery, which is beneficial to improving the continuous mileage of one charge and prolonging the service life of the battery.
Electric bicycles are not suitable for rough or steep (generally ≤8°) roads. If you encounter such a road, you should drive slowly or get out of the car and push it. Driving on this kind of road surface, the working environment of the motor, controller, battery, etc. will be poor, which will reduce the service life and be easily damaged.
Avoid frequent braking and starting when driving Forever E-Bike china. Before braking or at the same time, return the speed control handle to the original position, and use human power to ride as much as possible in areas with congested roads. In this way, it is possible to avoid damage to the battery caused by high current during starting.